Conair CL-79 Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 37
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
CONAIR
05-15-96 79 16
7.3 Inspecting and adjusting the belts
The V-belts must be inspected after 30 hours’ operation.
Loosen and remove the outer plate
on the belt guard.
Load one of the V-belts between the
rotor pulley and the motor pulley
with 25 N in the middle of and at a
right angle to the belt. Measure the
deflection and adjust the distance
between the pulleys as necessary until the tension is correct. The V-belt
should stretch 6 mm.
Adjusting:
Tension the belt by screwing on the flange nuts (A).
7.4 Lubrication
The bearing is delivered filled with grease. The bearing is maintenance-free and
needs no further lubrication.
A
F = 25 N
l = 6 mm
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Comentarios a estos manuales

Sin comentarios